Thailand · Accreditation
ISO/IEC 17025 accreditation in Thailand
Achieve ISO 17025 accreditation in Thailand with Sterling: 8,100+ client engagements in 60+ countries, 20+ years.
- Accreditation support
- Manila office team
- Effivity software included
- Academy training included
Who asks for ISO 17025 in Thailand
Clients include
ISO 17025 accreditation in Thailand at a glance
In Thailand, ISO/IEC 17025 is asked for by buyers and schemes rather than required by law. The drivers below show where the pressure comes from.
Thai laboratories have a choice of accreditation bodies, and the choice follows the type of work. The Bureau of Laboratory Accreditation, part of the Department of Science Service, accredits testing laboratories to ISO/IEC 17025, along with proficiency testing providers and reference material producers; it has signed the APLAC and ILAC arrangements since 2006 and a Global ACI annex dated May 2026. NSC-TISI accredits laboratories too, and the Department of Medical Sciences' bureau, BLQS-DMSc, covers medical laboratories. Accreditation is granted by the body after its own assessment, never by a consultant, and it is accreditation, not certification. Sterling's Manila office prepares laboratories for that assessment: management system, method validation and verification, measurement uncertainty, metrological traceability, proficiency testing plans and internal audits, with staff training through Sterling Academy. The questions Thai laboratories ask about the route are answered below.
Who needs ISO 17025 in Thailand, and what happens without it
In Thailand the question rarely comes from a law. It comes from the buyer, the regulator or the partner that wants proof before it signs. These are the organisations that get asked.
- Testing laboratories in industry and contract testingBLA-DSS accredits testing laboratories to ISO/IEC 17025.
- Calibration and metrology laboratoriesNSC-TISI and BLA-DSS both accredit laboratories; scope decides the route.
- Proficiency testing providers and reference material producersBLA-DSS has proficiency testing and reference material scopes recorded.
- In-house quality laboratories at manufacturersCustomers and regulators place more weight on results from accredited laboratories.
Not sure which of these applies to you?Answer a short set of questions and your readiness report arrives by e-mail.
Take the ISO/IEC 17025 readiness checkISO 17025 requirements in Thailand
Strip away the vocabulary and ISO/IEC 17025 requires a laboratory to prove six things about its competence and the results it reports.
In Thailand these six sit alongside the local laws and regulations listed under drivers below; one system can evidence both. The detail is on the global hub: ISO/IEC 17025 explained →
How to get ISO 17025 accreditation in Thailand
One team from the Manila office carries the work from scoping to accreditation. Clients across Thailand are served from Sterling's Manila office, on site where the work needs it and remotely otherwise.
- Discovery call and scopeEntities, locations, regulators and target date, agreed before any proposal.
- Gap assessment against ISO/IEC 17025 and the Thai requirements that apply to youControls you already run for your regulators and customers are reused, not rebuilt.
- Your system built with your team in EffivityRisks, controls, evidence, incidents and reviews in one live system the auditor can see.
- Internal audit, management review and corrective actionsYour internal auditors trained by Sterling; the evidence proven before any external review.
- The accreditation body assessmentThe accreditation body assesses and decides. Sterling supports the assessment.
- End to end, from one team
- Effivity ISO & GRC software
- Preferential Sterling Academy access, with complimentary awareness training for your people
- Internal auditor training for your audit team, as applicable to your standard
- Vulnerability assessment on ISMS engagements
The Sterling Promise: 100% on-time completion, 100% success, 8,100+ client engagements.Sterling does not certify. Certification decisions stay with independent bodies.
How long does ISO 17025 accreditation take in Thailand?
There is no standard duration: it depends on your scope and on how much of the system already runs. In Thailand these are the factors that set the timeline.
- Number of tests or calibrations in the requested scope
- Method validation and measurement uncertainty data available
- Proficiency testing results available before assessment
Sterling agrees a dated plan with you on the discovery call, once the scope is known.
How much does ISO 17025 accreditation cost in Thailand?
The cost has two parts: the consulting work to build and prove the system, and the accreditation body’s fees, which are quoted separately. In Thailand these factors move both.
- Size of the accreditation scope
- Accreditation body application and assessment fees, separate from consulting
- Equipment calibration and reference material needs
Sterling gives one customised, all-inclusive proposal after the discovery call, never before the scope is agreed.
ISO 17025 consultants and assessors in Thailand
Two different organisations are involved. A consultant helps you build the system and prove it works; the accreditation body then audits or assesses it and decides. Keeping the two separate is what makes the result credible to buyers and regulators.
- Check that the body’s accreditation or approval covers ISO 17025 and your sector, and that its certificates can be verified online.
- Ask the consultant how the local requirements in Thailand are mapped into the same system, so nothing runs twice.
- Ask for client references in your sector; Sterling’s client letters are available on request.
- Agree who owns the evidence and the tool after the engagement; with Sterling the system stays yours, in Effivity.
Laws and regulations that drive ISO 17025 in Thailand (3)
| Instrument | How it treats the standard |
|---|---|
| Bureau of Laboratory Accreditation (BLA-DSS) — ISO/IEC 17025 with ISO/IEC 17043 and ISO 17034 | Accreditation APLAC and ILAC MRA signatory since 2006; Global ACI arrangement annex covers testing, proficiency testing providers and reference material producers. |
| NSC-TISI laboratory accreditation | Accreditation NSC-TISI accredits laboratories, and ILAC describes it as an ILAC MRA signatory. |
| BLQS-DMSc — medical laboratories | Accreditation Medical laboratory accreditation under the Department of Medical Sciences, with a single-platform arrangement agreed among Thai bodies. |
Accreditation, audit language and remote audits in Thailand
Accreditation, not certification: ISO/IEC 17025 accreditation is granted by an accreditation body after its own assessment. In Thailand that is the Bureau of Laboratory Accreditation (BLA-DSS), NSC-TISI or, for medical laboratories, BLQS-DMSc, or another accreditation body within the international arrangements that your customers accept. Sterling prepares the laboratory; the accreditation body decides. Edition and transition details: ISO/IEC 17025 hub →
Audit language
Assessments can be held in Thai or English; agree the assessment language with the accreditation body, and keep methods and records in a language the staff and assessors can work in.
Remote and on-site
Document review elements may be remote at the accreditation body's discretion; witnessing of tests and calibrations is on site.
ISO 17025 in Thailand: questions clients ask
Who accredits testing laboratories in Thailand?
The Bureau of Laboratory Accreditation at the Department of Science Service (BLA-DSS) accredits testing laboratories to ISO/IEC 17025, and NSC-TISI accredits laboratories as well. Which suits you depends on your scope, your customers' acceptance and any regulator involved. Approach the body whose published scopes match your tests.
Is BLA accreditation recognised internationally?
For the scopes covered, yes. BLA-DSS records that it has been a signatory to the APLAC and ILAC mutual recognition arrangements since 2006, and its Global ACI annex lists testing under ISO/IEC 17025, proficiency testing providers under ISO/IEC 17043 and reference material producers under ISO 17034. Check that your own scope falls inside those listings.
Who accredits medical laboratories in Thailand?
The Bureau of Laboratory Quality Standards at the Department of Medical Sciences, known as BLQS-DMSc, handles medical laboratory accreditation, and ILAC describes it as an ILAC MRA signatory. A single-platform arrangement among the Thai bodies exists. Confirm with the body which standard and scope your medical laboratory should apply under.
Is ISO 17025 a certification?
No. ISO/IEC 17025 leads to accreditation, which an accreditation body grants after assessing the laboratory's competence, rather than to a certificate from a certification body. Expect an assessment of your methods, equipment and staff, and remember that the accreditation body, not any consultant, makes the decision.
More on ISO 17025 for Thai organisations
- ISO/IEC 17025: the complete guide
- Watch: How to implement ISO/IEC 17025
- Calibration laboratories: ISO/IEC 17025 for the sector
- Chemical and microbiological testing: ISO/IEC 17025 for the sector
- Construction materials testing: ISO/IEC 17025 for the sector
- Environmental laboratories: ISO/IEC 17025 for the sector
- Food and agriculture: ISO/IEC 17025 for the sector
- Government and forensic laboratories: ISO/IEC 17025 for the sector
- In-house manufacturing laboratories: ISO/IEC 17025 for the sector
- ISO 17025 accreditation in Thailand and every other standard Sterling delivers there
Other standards Thai businesses ask Sterling for
Organisations in Thailand often combine ISO/IEC 17025 with one of these, under one management system where the scopes allow.
Start with a free discovery call from the Manila office
A Sterling consultant goes through your entities, your regulators and your target date with you. No proposal until the scope is agreed.
Sources
- Bureau of Laboratory Accreditation (BLA-DSS) — ISO/IEC 17025 with ISO/IEC 17043 and ISO 17034 — dss.go.th; bla.dss.go.th (accessed 7 Oct 2026)
- NSC-TISI laboratory accreditation — ilac.org; tisi.go.th (accessed 7 Oct 2026)
- BLQS-DMSc — medical laboratories — ilac.org (accessed 7 Oct 2026)
- National Standardization Council of Thailand (NSC), whose office sits within the Thai Industrial Standards Institute (TISI), Ministry of Industry — iaf.nu; ilac.org; tisi.go.th (accessed 7 Oct 2026)
- Board of Investment (BOI) investment promotion — Investment Promotion Guide 2025 — osos.boi.go.th (accessed 7 Oct 2026)
Talk to a consultant
Plan your certification with the Manila team.
Tell us your goals, locations and target date. We’ll help you define the scope, timeline and next steps.
philippines@sterling-grc.com+1 201 263 4443 (global headquarters) · your nearest office and its number are at the top of this page
What would you like to achieve?
Choose a starting point. The enquiry form takes about a minute.
Book my free discovery callContinue to the enquiry form to share your details. Please do not include passwords, sensitive personal information or confidential files. A Sterling consultant replies within one working day. Privacy notice