Denmark · Accreditation
ISO/IEC 17025 accreditation in Denmark
Achieve ISO 17025 accreditation in Denmark with Sterling: 8,100+ client engagements in 60+ countries, 20+ years.
- Accreditation support
- Enschede office team
- Effivity software included
- Academy training included
Who asks for ISO 17025 in Denmark
Clients include
ISO 17025 accreditation in Denmark at a glance
In Denmark, ISO/IEC 17025 is asked for by buyers and schemes rather than required by law. The drivers below show where the pressure comes from.
Danish laboratories get ISO/IEC 17025 recognition from one place: DANAK, the Danish Accreditation Fund, which accredits laboratories, certification bodies, inspection bodies and verification bodies. Its standing abroad rests on the recognition arrangements, with ILAC listing Denmark's DANAK as a signatory for ISO/IEC 17025 calibration and testing and EA listing it as an MLA signatory. DANAK's international page ties this to EU Regulation 765 of 2008 and to European and global cooperation. Demand comes from food and environmental testing, calibration for industry, the life sciences cluster and energy-sector in-house labs. Accreditation is DANAK's decision, not Sterling's. Sterling's Enschede office prepares the management system, method validation, uncertainty budgets and internal audit ahead of assessment, with Effivity and Sterling Academy included in the engagement.
Who needs ISO 17025 in Denmark, and what happens without it
In Denmark the question rarely comes from a law. It comes from the buyer, the regulator or the partner that wants proof before it signs. These are the organisations that get asked.
- Testing laboratories in food, environment and materialsCustomers and regulators rely on accredited results, and DANAK is the national accreditation body for laboratories.
- Calibration laboratories serving industryILAC lists DANAK as a signatory for calibration and testing under ISO/IEC 17025, which supports acceptance of results abroad.
- Laboratories in the life sciences clusterPharmaceutical, biotech and health technology firms use accredited testing.
- In-house laboratories of manufacturers and energy firmsCustomers ask for results that carry accreditation marks.
Not sure which of these applies to you?Answer a short set of questions and your readiness report arrives by e-mail.
Take the ISO/IEC 17025 readiness checkISO 17025 requirements in Denmark
Strip away the vocabulary and ISO/IEC 17025 requires a laboratory to prove six things about its competence and the results it reports.
In Denmark these six sit alongside the local laws and regulations listed under drivers below; one system can evidence both. The detail is on the global hub: ISO/IEC 17025 explained →
How to get ISO 17025 accreditation in Denmark
One team from the Enschede office carries the work from scoping to accreditation. Clients in Denmark are served from Sterling's Enschede office, on-site where the work needs it and remotely otherwise.
- Discovery call and scopeEntities, locations, regulators and target date, agreed before any proposal.
- Gap assessment against ISO/IEC 17025 and the Danish requirements that apply to youControls you already run for your regulators and customers are reused, not rebuilt.
- Your system built with your team in EffivityRisks, controls, evidence, incidents and reviews in one live system the auditor can see.
- Internal audit, management review and corrective actionsYour internal auditors trained by Sterling; the evidence proven before any external review.
- The accreditation body assessmentThe accreditation body assesses and decides. Sterling supports the assessment.
- End to end, from one team
- Effivity ISO & GRC software
- Preferential Sterling Academy access, with complimentary awareness training for your people
- Internal auditor training for your audit team, as applicable to your standard
- Vulnerability assessment on ISMS engagements
The Sterling Promise: 100% on-time completion, 100% success, 8,100+ client engagements.Sterling does not certify. Certification decisions stay with independent bodies.
How long does ISO 17025 accreditation take in Denmark?
There is no standard duration: it depends on your scope and on how much of the system already runs. In Denmark these are the factors that set the timeline.
- Number and type of methods in the scope
- Competence records and proficiency testing history
- Measurement uncertainty and traceability work
- DANAK assessor availability
Sterling agrees a dated plan with you on the discovery call, once the scope is known.
How much does ISO 17025 accreditation cost in Denmark?
The cost has two parts: the consulting work to build and prove the system, and the accreditation body’s fees, which are quoted separately. In Denmark these factors move both.
- Methods and measurement ranges in scope
- Equipment calibration and validation
- DANAK assessment fees, quoted separately
- Proficiency testing participation
Sterling gives one customised, all-inclusive proposal after the discovery call, never before the scope is agreed.
ISO 17025 consultants and assessors in Denmark
Two different organisations are involved. A consultant helps you build the system and prove it works; the accreditation body then audits or assesses it and decides. Keeping the two separate is what makes the result credible to buyers and regulators.
- Check that the body’s accreditation or approval covers ISO 17025 and your sector, and that its certificates can be verified online.
- Ask the consultant how the local requirements in Denmark are mapped into the same system, so nothing runs twice.
- Ask for client references in your sector; Sterling’s client letters are available on request.
- Agree who owns the evidence and the tool after the engagement; with Sterling the system stays yours, in Effivity.
Laws and regulations that drive ISO 17025 in Denmark (4)
| Instrument | How it treats the standard |
|---|---|
| ILAC MRA listing for DANAK | Recognition ILAC lists Denmark's DANAK as a signatory for ISO/IEC 17025 calibration and testing, ISO 15189, ISO/IEC 17020, ISO/IEC 17043 and ISO 17034. |
| EA directory entry for DANAK | Recognition EA lists DANAK as an MLA signatory with scopes that include management system certification, product and person certification, inspection, calibration and testing. |
| DANAK (Den Danske Akkrediteringsfond) as Denmark's national accreditation body | Recognition DANAK describes itself as the national accreditation body for laboratories, certification bodies, inspection bodies and validation and verification bodies. |
| Regulation (EC) No 765/2008 on accreditation, as described by DANAK | The regulation itself DANAK's international page says accreditation in Europe is regulated by EU Regulation 765, adopted in 2008, and that accreditation bodies cooperate through EA and Global ACI. |
Accreditation, audit language and remote audits in Denmark
Accreditation, not certification: DANAK, Denmark's national accreditation body, assesses laboratories against ISO/IEC 17025 and grants accreditation by scope. The ILAC listing shows Denmark's DANAK as a signatory for ISO/IEC 17025 calibration and testing. Sterling prepares the laboratory; DANAK decides. Edition and transition details: ISO/IEC 17025 hub →
Audit language
DANAK publishes in Danish and has an English section. Agree the language of assessment with DANAK, and keep method documentation in a language the assessors can read.
Remote and on-site
DANAK assessments combine document review with on-site witnessing of work; the assessment approach is set by DANAK.
ISO 17025 in Denmark: questions clients ask
Who accredits laboratories in Denmark?
DANAK, the Danish Accreditation Fund. It describes itself as the national accreditation body, an independent non-profit fund responsible for accrediting laboratories, certification bodies, inspection bodies and validation and verification bodies. It assesses against ISO/IEC 17025 and similar standards, and publishes a database of accredited companies so customers can check scopes.
Are DANAK accreditations recognised abroad?
Within the recognition arrangements, yes. ILAC lists Denmark's DANAK as an ILAC MRA signatory for ISO/IEC 17025 calibration and testing, plus ISO 15189, ISO/IEC 17020, ISO/IEC 17043 and ISO 17034, and EA lists it as an MLA signatory. Recognition by a particular customer or regulator is still a matter for them, so ask.
What is the legal basis for accreditation in Europe?
DANAK's international page says accreditation in Europe is regulated by EU Regulation 765, adopted in 2008, and that accreditation bodies cooperate through EA and, globally, through Global ACI. This is why one national body per country grants accreditation that other countries can rely on. Ask DANAK for scheme specifics relevant to your methods.
Is 17025 accreditation a certificate that Sterling can issue?
No. Accreditation is DANAK's decision after assessing your competence and methods, and Sterling cannot grant it. Sterling helps laboratories write the management system, validate methods, estimate measurement uncertainty and rehearse an assessment. The outcome is an accreditation scope listed by DANAK, not a certificate.
More on ISO 17025 for Danish organisations
- ISO/IEC 17025: the complete guide
- Watch: How to implement ISO/IEC 17025
- Calibration laboratories: ISO/IEC 17025 for the sector
- Chemical and microbiological testing: ISO/IEC 17025 for the sector
- Construction materials testing: ISO/IEC 17025 for the sector
- Environmental laboratories: ISO/IEC 17025 for the sector
- Food and agriculture: ISO/IEC 17025 for the sector
- Government and forensic laboratories: ISO/IEC 17025 for the sector
- In-house manufacturing laboratories: ISO/IEC 17025 for the sector
- ISO 17025 accreditation in Denmark and every other standard Sterling delivers there
Other standards Danish businesses ask Sterling for
Organisations in Denmark often combine ISO/IEC 17025 with one of these, under one management system where the scopes allow.
Start with a free discovery call from the Enschede office
A Sterling consultant goes through your entities, your regulators and your target date with you. No proposal until the scope is agreed.
Sources
- ILAC MRA listing for DANAK — ilac.org (accessed 11 Oct 2026)
- EA directory entry for DANAK — european-accreditation.org (accessed 11 Oct 2026)
- DANAK (Den Danske Akkrediteringsfond) as Denmark's national accreditation body — danak.dk (accessed 11 Oct 2026)
- Regulation (EC) No 765/2008 on accreditation, as described by DANAK — danak.dk (accessed 11 Oct 2026)
- DANAK (Den Danske Akkrediteringsfond, the Danish Accreditation Fund) — danak.dk; european-accreditation.org; ilac.org (accessed 11 Oct 2026)
Talk to a consultant
Plan your certification with the Enschede team.
Tell us your goals, locations and target date. We’ll help you define the scope, timeline and next steps.
netherlands@sterling-grc.com+1 201 263 4443 (global headquarters) · your nearest office and its number are at the top of this page
What would you like to achieve?
Choose a starting point. The enquiry form takes about a minute.
Book my free discovery callContinue to the enquiry form to share your details. Please do not include passwords, sensitive personal information or confidential files. A Sterling consultant replies within one working day. Privacy notice