hello@sterling-grc.com +1 201 263 4443 New York ISO & GRC consulting in 60+ countries
SterlingInternational Consulting Talk to a consultantTalk to us

Austria · Accreditation

ISO/IEC 17025 accreditation in Austria

Achieve ISO 17025 accreditation in Austria with Sterling: 8,100+ client engagements in 60+ countries, 20+ years.

  • Accreditation support
  • Frankfurt office team
  • Effivity software included
  • Academy training included

Clients include

  • Allianz
  • Emirates Flight Catering
  • Etihad Rail
  • Haier
  • Whirlpool
  • Emerson
In short

ISO 17025 accreditation in Austria at a glance

Akkreditierungsgesetz 2012 (AkkG 2012), BGBl. I Nr. 28/2012 is the instrument itself: it applies to the organisations within its scope, and buyers and partners in Austria ask for evidence that you meet it.

Laboratory accreditation in Austria runs through one door. The Akkreditierungsgesetz 2012 makes the responsible federal minister the accreditation body and assigns the operational work to Akkreditierung Austria, which accredits conformity assessment bodies established in Austria. ILAC lists it as an MRA signatory for ISO/IEC 17025 calibration and testing, ISO 15189 and ISO/IEC 17020, and EA lists it as an MLA signatory, which is why accredited results travel. Accreditation is granted by scope, so the methods, ranges and uncertainties you declare define what you can issue. Independent, in-house and sector laboratories in life sciences, food, electronics and manufacturing all use the route. Sterling prepares the laboratory from its Frankfurt office, with Effivity and Sterling Academy included; the accreditation body decides, not Sterling.

The need

Who needs ISO 17025 in Austria, and what happens without it

In Austria the question rarely comes from a law. It comes from the buyer, the regulator or the partner that wants proof before it signs. These are the organisations that get asked.

  • Independent calibration and testing laboratoriesAkkreditierung Austria accredits laboratories established in Austria and is an ILAC MRA signatory for ISO/IEC 17025.
  • In-house laboratories of manufacturersPlant laboratories seek accreditation so customers and authorities accept their results without repeat testing.
  • Laboratories serving regulated sectorsLife sciences, food and environmental customers ask testing partners for accreditation by scope.
  • Laboratories planning international workEA and ILAC arrangements are what make accredited results travel, so the national body's recognition matters.

Not sure which of these applies to you?Answer a short set of questions and your readiness report arrives by e-mail.

Take the ISO/IEC 17025 readiness check
Requirements

ISO 17025 requirements in Austria

Strip away the vocabulary and ISO/IEC 17025 requires a laboratory to prove six things about its competence and the results it reports.

You are impartialCommercial, financial or other pressures do not influence results, and risks to impartiality are identified and managed.
Staff are competent and authorisedEach person who performs, reviews or reports work is qualified, trained, monitored and authorised for those tasks.
Equipment is calibrated and traceableEquipment is fit for purpose and calibrated, with measurement results traceable to recognised references.
Methods are validated or verifiedMethods suit the work, are validated where needed or verified before use, and measurement uncertainty is evaluated.
Results are checked and reported properlyQuality control and proficiency testing confirm validity, and reports state results clearly, accurately and without ambiguity.
The management system worksComplaints, nonconforming work, risks, internal audits and management review run under a documented management system.

In Austria these six sit alongside the local laws and regulations listed under drivers below; one system can evidence both. The detail is on the global hub: ISO/IEC 17025 explained →

How Sterling gets an Austrian company accredited

How to get ISO 17025 accreditation in Austria

One team from the Frankfurt office carries the work from scoping to accreditation. Clients in Austria are served from Sterling's Frankfurt office, on-site where the work needs it and remotely otherwise.

  1. Discovery call and scopeEntities, locations, regulators and target date, agreed before any proposal.
  2. Gap assessment against ISO/IEC 17025 and the Austrian requirements that apply to youControls you already run for your regulators and customers are reused, not rebuilt.
  3. Your system built with your team in EffivityRisks, controls, evidence, incidents and reviews in one live system the auditor can see.
  4. Internal audit, management review and corrective actionsYour internal auditors trained by Sterling; the evidence proven before any external review.
  5. The accreditation body assessmentThe accreditation body assesses and decides. Sterling supports the assessment.
Included in every engagement
  • End to end, from one team
  • Effivity ISO & GRC software
  • Preferential Sterling Academy access, with complimentary awareness training for your people
  • Internal auditor training for your audit team, as applicable to your standard
  • Vulnerability assessment on ISMS engagements

The Sterling Promise: 100% on-time completion, 100% success, 8,100+ client engagements.Sterling does not certify. Certification decisions stay with independent bodies.

Time

How long does ISO 17025 accreditation take in Austria?

There is no standard duration: it depends on your scope and on how much of the system already runs. In Austria these are the factors that set the timeline.

  • Number and type of methods in the scope
  • Competence records and proficiency testing history
  • Measurement uncertainty and traceability work
  • Assessor availability

Sterling agrees a dated plan with you on the discovery call, once the scope is known.

Cost

How much does ISO 17025 accreditation cost in Austria?

The cost has two parts: the consulting work to build and prove the system, and the accreditation body’s fees, which are quoted separately. In Austria these factors move both.

  • Methods and measurement ranges in scope
  • Equipment calibration and validation
  • Accreditation body fees, quoted separately
  • Proficiency testing participation

Sterling gives one customised, all-inclusive proposal after the discovery call, never before the scope is agreed.

Choosing a partner

ISO 17025 consultants and assessors in Austria

Two different organisations are involved. A consultant helps you build the system and prove it works; the accreditation body then audits or assesses it and decides. Keeping the two separate is what makes the result credible to buyers and regulators.

  • Check that the body’s accreditation or approval covers ISO 17025 and your sector, and that its certificates can be verified online.
  • Ask the consultant how the local requirements in Austria are mapped into the same system, so nothing runs twice.
  • Ask for client references in your sector; Sterling’s client letters are available on request.
  • Agree who owns the evidence and the tool after the engagement; with Sterling the system stays yours, in Effivity.

    Laws and regulations that drive ISO 17025 in Austria (4)

    InstrumentHow it treats the standard
    Akkreditierung Austria as the Austrian national accreditation bodyRegulator page
    The Federal Minister for Economy set up Akkreditierung Austria as a department of the ministry; it accredits conformity assessment bodies established in Austria.
    Akkreditierungsgesetz 2012 (AkkG 2012), BGBl. I Nr. 28/2012The instrument itself
    It makes the responsible federal minister the accreditation body and assigns the operational work to the unit called Akkreditierung Austria.
    ILAC MRA listing for Akkreditierung AustriaRecognition
    ILAC lists Akkreditierung Austria as an MRA signatory for ISO/IEC 17025 calibration and testing, ISO 15189 medical testing and ISO/IEC 17020 inspection.
    EA directory entry for Akkreditierung AustriaRecognition
    EA lists Akkreditierung Austria as an MLA signatory with scopes that include management system certification, product certification, certification of persons, inspection, calibration, testing and validation and verification.

    Accreditation, audit language and remote audits in Austria

    Accreditation, not certification: Akkreditierung Austria, the national accreditation body inside the Federal Ministry for Economy, Energy and Tourism, assesses laboratories against ISO/IEC 17025 and grants accreditation by scope. It accredits bodies established in Austria. The ILAC listing shows it as an MRA signatory for ISO/IEC 17025 calibration and testing. Sterling prepares the laboratory; the accreditation body decides. Edition and transition details: ISO/IEC 17025 hub →

    Audit language

    Akkreditierung Austria publishes in German with basic information in English. Agree the language of assessment with the accreditation body, and keep method documentation in a language the assessors can read.

    Remote and on-site

    Assessments combine document review with on-site witnessing of work; the assessment approach is set by Akkreditierung Austria.

    ISO 17025 in Austria: questions clients ask

    Who accredits ISO/IEC 17025 laboratories in Austria?

    Akkreditierung Austria, a department of the Federal Ministry for Economy, Energy and Tourism acting under the Akkreditierungsgesetz 2012. It accredits conformity assessment bodies established in Austria, with their headquarters for the accredited activity there. Accreditation is granted by scope, so list the methods and ranges you need and ask the body how it would assess them.

    Is Akkreditierung Austria recognised internationally for laboratory work?

    Yes, on the listings of both bodies. ILAC shows Akkreditierung Austria as an MRA signatory for ISO/IEC 17025 calibration and testing, ISO 15189 and ISO/IEC 17020, and EA lists it as an MLA signatory with calibration and testing scopes. Recognition applies to the scopes shown, so check that yours is covered.

    Is ISO/IEC 17025 accreditation different from ISO 9001 certification?

    Yes. Certification to ISO 9001 audits a management system, whereas ISO/IEC 17025 accreditation assesses technical competence for specific methods, including traceability and measurement uncertainty, and the accreditation body decides the scope. A laboratory often holds a quality system as a base, but one does not replace the other.

    What does Sterling do for a laboratory seeking accreditation?

    Sterling prepares the laboratory and does not accredit it. From the Frankfurt office, on-site where the work needs it, it builds the quality system, method validation records, uncertainty budgets and internal audit evidence, with Effivity and Sterling Academy included. Akkreditierung Austria assesses and decides on accreditation.

    Read more

    More on ISO 17025 for Austrian organisations

    Explore

    Other standards Austrian businesses ask Sterling for

    Organisations in Austria often combine ISO/IEC 17025 with one of these, under one management system where the scopes allow.

    All 22 standards Sterling delivers in Austria →

    Next step

    Start with a free discovery call from the Frankfurt office

    A Sterling consultant goes through your entities, your regulators and your target date with you. No proposal until the scope is agreed.

    Sources

    1. Akkreditierung Austria as the Austrian national accreditation body — bmwet.gv.at (accessed 11 Oct 2026)
    2. Akkreditierungsgesetz 2012 (AkkG 2012), BGBl. I Nr. 28/2012 — ris.bka.gv.at (accessed 11 Oct 2026)
    3. ILAC MRA listing for Akkreditierung Austria — ilac.org (accessed 11 Oct 2026)
    4. EA directory entry for Akkreditierung Austria — european-accreditation.org (accessed 11 Oct 2026)
    5. Akkreditierung Austria (Austrian national accreditation body, a department of the Federal Ministry for Economy, Energy and Tourism) — bmwet.gv.at; ris.bka.gv.at; european-accreditation.org; ilac.org (accessed 11 Oct 2026)

    Talk to a consultant

    Plan your certification with the Frankfurt team.

    Tell us your goals, locations and target date. We’ll help you define the scope, timeline and next steps.

    germany@sterling-grc.com

    +1 201 263 4443 (global headquarters) · your nearest office and its number are at the top of this page

    What would you like to achieve?

    Choose a starting point. The enquiry form takes about a minute.

    Your goal
    Book my free discovery call

    Continue to the enquiry form to share your details. Please do not include passwords, sensitive personal information or confidential files. A Sterling consultant replies within one working day. Privacy notice