Türkiye · Certification
ISO 45001 certification in Türkiye
Achieve ISO 45001 certification in Türkiye with Sterling: 8,100+ client engagements in 60+ countries, 20+ years.
- Accredited certification
- Dubai office team
- Effivity software included
- Academy training included
Who asks for ISO 45001 in Türkiye
Clients include
ISO 45001 certification in Türkiye at a glance
In Türkiye, ISO 45001 is asked for by buyers and schemes rather than required by law. The drivers below show where the pressure comes from.
Workplace safety in Türkiye rests on Occupational Health and Safety Law No. 6331, published on 30 June 2012, which sets employer duties for every sector. ISO 45001 adds a management system on top: hazard identification, worker consultation, contractor control, incident learning and internal audit. It is not required by the Law, but foundries, construction firms, automotive suppliers and large apparel producers are regularly asked for it by customers, and a public tender can ask for certificates from accredited institutions. The certificate comes from a body accredited by TÜRKAK, which Global ACI shows as recognised for ISO 45001 since 2020, or by another body within the international arrangements. Sterling's Dubai office supports the build, from risk registers to internal audits, on-site or remotely, and Effivity and Sterling Academy are included with the engagement.
Who needs ISO 45001 in Türkiye, and what happens without it
In Türkiye the question rarely comes from a law. It comes from the buyer, the regulator or the partner that wants proof before it signs. These are the organisations that get asked.
- Contractors and construction firmsPrincipal contractors and clients ask subcontractors how they manage workplace risk, and a public tender may ask for certificates.
- Heavy manufacturers, foundries and automotive suppliersMachinery, heat and noise exposure make a structured hazard and incident system valuable, and customers ask for it.
- Textile and apparel producers with large workforcesLarge shift-based workforces make training, emergency preparedness and contractor control central to buyer audits.
- Employers needing a framework above legal minimumsThe national OHS Law sets employer duties, and a management system turns them into routines that can be audited.
- Suppliers to multinational customersGroup-wide supplier requirements frequently list ISO 45001 beside ISO 9001 and ISO 14001.
Not sure which of these applies to you?Answer a short set of questions and your readiness report arrives by e-mail.
Take the ISO 45001 readiness checkISO 45001 requirements in Türkiye
Strip away the vocabulary and ISO 45001 requires a company to prove six things about keeping its people safe and healthy at work.
In Türkiye these six sit alongside the local laws and regulations listed under drivers below; one system can evidence both. The detail is on the global hub: ISO 45001 explained →
How to get ISO 45001 certified in Türkiye
One team from the Dubai office carries the work from scoping to certificate. Clients across Türkiye are served from Sterling's Dubai office, on-site where the work needs it and remotely otherwise.
- Discovery call and scopeEntities, locations, regulators and target date, agreed before any proposal.
- Gap assessment against ISO 45001 and the Turkish requirements that apply to youControls you already run for your regulators and customers are reused, not rebuilt.
- Your system built with your team in EffivityRisks, controls, evidence, incidents and reviews in one live system the auditor can see.
- Internal audit, management review and corrective actionsYour internal auditors trained by Sterling; the evidence proven before the certification body arrives.
- Certification body stage 1 and stage 2, then surveillanceAn accredited body audits and decides. Sterling supports the audits and the three-year cycle.
- End to end, from one team
- Effivity ISO & GRC software
- Preferential Sterling Academy access, with complimentary awareness training for your people
- Internal auditor training for your audit team, as applicable to your standard
- Vulnerability assessment on ISMS engagements
The Sterling Promise: 100% on-time completion, 100% success, 8,100+ client engagements.Sterling does not certify. Certification decisions stay with independent bodies.
How long does ISO 45001 certification take in Türkiye?
There is no standard duration: it depends on your scope and on how much of the system already runs. In Türkiye these are the factors that set the timeline.
- Hazard identification and risk assessment across all shifts and sites
- Contractor and subcontractor control to put in place
- Incident and near-miss records to build up
- Certification body scheduling around holiday periods and shutdowns
Sterling agrees a dated plan with you on the discovery call, once the scope is known.
How much does ISO 45001 certification cost in Türkiye?
The cost has two parts: the consulting work to build and prove the system, and the certification body’s audit fees, which are quoted separately. In Türkiye these factors move both.
- Number of sites, shifts, workers and contractors in scope
- Depth of hazard controls and training still to deliver
- Certification body audit fees, quoted separately
- Combination with ISO 9001 and ISO 14001
Sterling gives one customised, all-inclusive proposal after the discovery call, never before the scope is agreed.
ISO 45001 consultants and certification bodies in Türkiye
Two different organisations are involved. A consultant helps you build the system and prove it works; an accredited certification body then audits or assesses it and decides. Keeping the two separate is what makes the result credible to buyers and regulators.
- Check that the body’s accreditation or approval covers ISO 45001 and your sector, and that its certificates can be verified online.
- Ask the consultant how the local requirements in Türkiye are mapped into the same system, so nothing runs twice.
- Ask for client references in your sector; Sterling’s client letters are available on request.
- Agree who owns the evidence and the tool after the engagement; with Sterling the system stays yours, in Effivity.
Laws and regulations that drive ISO 45001 in Türkiye (3)
| Instrument | How it treats the standard |
|---|---|
| TÜRKAK recognition entries (Global ACI) | Market driver Global ACI shows TÜRKAK recognised for ISO 45001 management systems certification from 5 February 2020, so an accredited local route exists; this is not a mandate. |
| Occupational Health and Safety Law No. 6331 | Framework law The national OHS Law, published on 30 June 2012; it sets employer duties, and certification to ISO 45001 does not replace compliance with it. |
| Public Procurement Law No. 4734 and the Public Procurement Authority | Does not make the standard compulsory A contracting authority may ask for certificates from accredited institutions, and the tender documents say which. |
Accreditation, audit language and remote audits in Türkiye
Use a certification body accredited for ISO 45001 by TÜRKAK or by an accreditation body within the international mutual recognition arrangements (Global ACI — Global Accreditation Cooperation Incorporated, formerly the IAF MLA); check that the accreditation scope covers the standard and your sector. Global ACI lists TÜRKAK as recognised for ISO 45001 management systems certification from February 2020. The accredited certification body decides, not Sterling. Edition and transition details: ISO 45001 hub →
Audit language
Turkish is the usual working language and the audit is normally run in it; agree the audit language, any interpreter and the language of controlled documents with the certification body at application, and say early if records will be in English.
Remote and on-site
Documentation review can be remote at the certification body's discretion; hazards and controls are verified by walking sites, so production floors and construction sites are visited on-site.
ISO 45001 in Türkiye: questions clients ask
Does ISO 45001 replace compliance with Law No. 6331?
No. Occupational Health and Safety Law No. 6331 sets employer duties that apply whether or not you are certified, and the certificate does not discharge them. ISO 45001 helps organise hazards, training, incidents and audits so that compliance is easier to show. Check which regulations apply to your sector with counsel or the Ministry of Labour and Social Security.
Who issues an ISO 45001 certificate in Türkiye?
Your appointed certification body issues it after auditing, while Sterling only prepares you. Global ACI lists TÜRKAK as the accreditation body recognised for ISO 45001 since February 2020; others in the arrangements may serve Turkish sites too. Choose on an accreditation scope covering your industry, ask who the auditors are, and compare how they treat contractor control.
Do subcontractors need their own certificate to work for a principal contractor?
It depends on the contract. Some principal contractors and public tenders ask for ISO 45001 and others accept a described system, and the Public Procurement Law leaves each authority to name its requirements. Read the qualification clause or subcontract terms before investing, and ask whether the certificate must name the site where work happens.
How are workers consulted under ISO 45001?
The standard expects workers, and where they exist their representatives, to be consulted and to take part in hazard identification, incident investigation and policy development. Auditors will ask workers, not only managers, how this works in practice. Prepare records of meetings, suggestions and corrective actions, and train supervisors on the idea.
More on ISO 45001 for Turkish organisations
- ISO 45001: the complete guide
- Watch: How to implement ISO 45001
- Construction and engineering: ISO 45001 for the sector
- Facilities and security: ISO 45001 for the sector
- Healthcare: ISO 45001 for the sector
- Logistics and warehousing: ISO 45001 for the sector
- Manufacturing: ISO 45001 for the sector
- Oil, gas and energy: ISO 45001 for the sector
- Professional services and offices: ISO 45001 for the sector
- ISO 45001 certification in Türkiye and every other standard Sterling delivers there
Other standards Turkish businesses ask Sterling for
Organisations in Türkiye often combine ISO 45001 with one of these, under one management system where the scopes allow.
Start with a free discovery call from the Dubai office
A Sterling consultant goes through your entities, your regulators and your target date with you. No proposal until the scope is agreed.
Sources
- TÜRKAK recognition entries (Global ACI) — global-aci.org; turkak.org.tr (accessed 11 Oct 2026)
- Occupational Health and Safety Law No. 6331 — resmigazete.gov.tr; csgb.gov.tr (accessed 11 Oct 2026)
- Public Procurement Law No. 4734 and the Public Procurement Authority — kik.gov.tr; dosyalar.kik.gov.tr (accessed 11 Oct 2026)
- TÜRKAK (Turkish Accreditation Agency) — global-aci.org; turkak.org.tr (accessed 11 Oct 2026)
- Public procurement under the Public Procurement Law and the Public Procurement Authority — kik.gov.tr; dosyalar.kik.gov.tr (accessed 11 Oct 2026)
- Defence and aerospace programmes — ssb.gov.tr (accessed 11 Oct 2026)
Talk to a consultant
Plan your certification with the Dubai team.
Tell us your goals, locations and target date. We’ll help you define the scope, timeline and next steps.
uae@sterling-grc.com+1 201 263 4443 (global headquarters) · your nearest office and its number are at the top of this page
What would you like to achieve?
Choose a starting point. The enquiry form takes about a minute.
Book my free discovery callContinue to the enquiry form to share your details. Please do not include passwords, sensitive personal information or confidential files. A Sterling consultant replies within one working day. Privacy notice