Denmark · Certification
AS9100 certification in Denmark
Achieve AS9100 certification in Denmark with Sterling: 8,100+ client engagements in 60+ countries, 20+ years.
- Accredited certification
- Enschede office team
- Effivity software included
- Academy training included
Who asks for AS9100 in Denmark
Clients include
AS9100 certification in Denmark at a glance
In Denmark, AS9100 is asked for by buyers and schemes rather than required by law. The drivers below show where the pressure comes from.
Aerospace quality requirements reach Danish suppliers through contracts, not through statute. Machining shops, fabricators, electronics firms and testing services that sell to aerospace primes are asked for AS9100, while defence work can call for AQAP certification, a scheme DANAK lists among the certifications it accredits. DANAK, the national accreditation body, publishes the rules on how accreditation scopes are drawn for management system certification, which is why a certification body's scope deserves a close look before you apply. The certificate comes from an accredited, scheme-authorised certification body, never from Sterling. Sterling's Enschede office builds the system on top of ISO 9001, adds configuration management, counterfeit-part prevention and special-process controls, and prepares you for audit, with Effivity and Sterling Academy included in the engagement.
Who needs AS9100 in Denmark, and what happens without it
In Denmark the question rarely comes from a law. It comes from the buyer, the regulator or the partner that wants proof before it signs. These are the organisations that get asked.
- Machining, fabrication and electronics firms supplying aerospace primesAerospace customers flow quality-system requirements down their supply chains.
- Defence-sector suppliersDANAK lists accreditation for AQAP certification, which defence contracts may call for as well as an aerospace quality certificate.
- Danish manufacturers diversifying into aerospaceA certified system is often the entry ticket to a supplier approval process.
- Special-process and surface-treatment providersAerospace primes expect these suppliers to hold or support the sector standard.
Not sure which of these applies to you?Answer a short set of questions and your readiness report arrives by e-mail.
Take the AS9100 readiness checkAS9100 requirements in Denmark
Strip away the vocabulary and AS9100 asks a supplier to prove six things about delivering aerospace products safely and on time.
In Denmark these six sit alongside the local laws and regulations listed under drivers below; one system can evidence both. The detail is on the global hub: AS9100 explained →
How to get AS9100 certified in Denmark
One team from the Enschede office carries the work from scoping to certificate. Clients in Denmark are served from Sterling's Enschede office, on-site where the work needs it and remotely otherwise.
- Discovery call and scopeEntities, locations, regulators and target date, agreed before any proposal.
- Gap assessment against AS9100 and the Danish requirements that apply to youControls you already run for your regulators and customers are reused, not rebuilt.
- Your system built with your team in EffivityRisks, controls, evidence, incidents and reviews in one live system the auditor can see.
- Internal audit, management review and corrective actionsYour internal auditors trained by Sterling; the evidence proven before the certification body arrives.
- Certification body stage 1 and stage 2, then surveillanceAn accredited body audits and decides. Sterling supports the audits and the three-year cycle.
- End to end, from one team
- Effivity ISO & GRC software
- Preferential Sterling Academy access, with complimentary awareness training for your people
- Internal auditor training for your audit team, as applicable to your standard
- Vulnerability assessment on ISMS engagements
The Sterling Promise: 100% on-time completion, 100% success, 8,100+ client engagements.Sterling does not certify. Certification decisions stay with independent bodies.
How long does AS9100 certification take in Denmark?
There is no standard duration: it depends on your scope and on how much of the system already runs. In Denmark these are the factors that set the timeline.
- Customer flow-down requirements and approvals
- Maturity of configuration management and counterfeit-part controls
- Number of sites and special processes
- Certification body scheduling
Sterling agrees a dated plan with you on the discovery call, once the scope is known.
How much does AS9100 certification cost in Denmark?
The cost has two parts: the consulting work to build and prove the system, and the certification body’s audit fees, which are quoted separately. In Denmark these factors move both.
- Number of sites and product families
- Special-process controls and traceability gaps
- Certification body audit fees, quoted separately
- Customer-specific approvals
Sterling gives one customised, all-inclusive proposal after the discovery call, never before the scope is agreed.
AS9100 consultants and certification bodies in Denmark
Two different organisations are involved. A consultant helps you build the system and prove it works; an accredited certification body then audits or assesses it and decides. Keeping the two separate is what makes the result credible to buyers and regulators.
- Check that the body’s accreditation or approval covers AS9100 and your sector, and that its certificates can be verified online.
- Ask the consultant how the local requirements in Denmark are mapped into the same system, so nothing runs twice.
- Ask for client references in your sector; Sterling’s client letters are available on request.
- Agree who owns the evidence and the tool after the engagement; with Sterling the system stays yours, in Effivity.
Laws and regulations that drive AS9100 in Denmark (4)
| Instrument | How it treats the standard |
|---|---|
| DANAK (Den Danske Akkrediteringsfond) as Denmark's national accreditation body | Recognition DANAK describes itself as the national accreditation body for laboratories, certification bodies, inspection bodies and validation and verification bodies. |
| EA directory entry for DANAK | Recognition EA lists DANAK as an MLA signatory with scopes that include management system certification, product and person certification, inspection, calibration and testing. |
| DANAK AMC 47 on accreditation for AQAP certification | Accreditation DANAK lists AQAP certification among the schemes it accredits, with a June 2025 edition of AMC 47. |
| DANAK AMC 40 on the scope of accreditation for QMS, EMS, OH&S and energy management certification | Accreditation DANAK's news lists a January 2026 edition covering how the accreditation scope is delimited for quality, environmental, occupational health and safety and energy management systems. |
Accreditation, audit language and remote audits in Denmark
Use a certification body that is authorised for aerospace scheme certification under the scheme's own rules and accredited by DANAK or by another accreditation body within the international mutual recognition arrangements (Global ACI — Global Accreditation Cooperation Incorporated, formerly the IAF MLA). Confirm the scheme authorisation and the accreditation scope with the body and your customers before applying. Edition and transition details: AS9100 hub →
Audit language
Danish is the official language and English is widely used in business. Agree the audit language and the language of controlled documents with the certification body at application, and follow any language requirement in a contract or a regulator's procedure.
Remote and on-site
Audits are on-site because production, inspection and configuration-control areas must be seen; document review can be partly remote.
AS9100 in Denmark: questions clients ask
Does Danish law require AS9100?
No Danish instrument cited here requires it. AS9100 demand comes from aerospace and defence customers who flow quality requirements down to suppliers. What the Danish system supplies is the accreditation infrastructure: DANAK accredits management system certification and lists AQAP certification as a scheme it accredits. Ask each customer which certificate and scheme authorisation it expects.
How does AQAP certification differ from AS9100?
They answer different customers. Different customers ask for them. AQAP is tied to defence contracting, and DANAK lists AQAP certification as an accredited scheme under its rule AMC 47. AS9100 is the aerospace sector's quality standard. A supplier could be asked for either, or both, so read the contract's quality clause before choosing.
Which accreditation should an AS9100 certification body hold?
Look for accreditation from DANAK or an equivalent body, plus authorisation under the aerospace scheme's own rules. EA records DANAK as an MLA signatory with a management system certification scope, but scheme authorisation is a separate check with the scheme and your customers. Sterling prepares the system and cannot certify.
Is an AS9100 audit carried out in English in Denmark?
Often, since aerospace customers work internationally, but the language is agreed rather than assumed. Danish is official and English is widely used in business, so state your preferred audit and document language at application. That lets the certification body field auditors who hold the right sector credentials and can read your records.
More on AS9100 for Danish organisations
Other standards Danish businesses ask Sterling for
Organisations in Denmark often combine AS9100 with one of these, under one management system where the scopes allow.
Start with a free discovery call from the Enschede office
A Sterling consultant goes through your entities, your regulators and your target date with you. No proposal until the scope is agreed.
Sources
- DANAK (Den Danske Akkrediteringsfond) as Denmark's national accreditation body — danak.dk (accessed 11 Oct 2026)
- EA directory entry for DANAK — european-accreditation.org (accessed 11 Oct 2026)
- DANAK AMC 47 on accreditation for AQAP certification — danak.dk (accessed 11 Oct 2026)
- DANAK AMC 40 on the scope of accreditation for QMS, EMS, OH&S and energy management certification — danak.dk (accessed 11 Oct 2026)
- DANAK (Den Danske Akkrediteringsfond, the Danish Accreditation Fund) — danak.dk; european-accreditation.org; ilac.org (accessed 11 Oct 2026)
Talk to a consultant
Plan your certification with the Enschede team.
Tell us your goals, locations and target date. We’ll help you define the scope, timeline and next steps.
netherlands@sterling-grc.com+1 201 263 4443 (global headquarters) · your nearest office and its number are at the top of this page
What would you like to achieve?
Choose a starting point. The enquiry form takes about a minute.
Book my free discovery callContinue to the enquiry form to share your details. Please do not include passwords, sensitive personal information or confidential files. A Sterling consultant replies within one working day. Privacy notice