ISO and GRC certification consulting in Dallas-Fort Worth

ISO and GRC certification in Dallas-Fort Worth at a glance

Dallas-Fort Worth runs on freight, headquarters and manufacturing. AllianceTexas, in north Fort Worth, wraps an industrial airport, a BNSF intermodal facility and a foreign-trade zone into one of the nation's largest inland ports, while DFW Airport is the state's largest airport-and-intermodal gateway by trade value. The Dallas Regional Chamber counts Lockheed Martin Aeronautics, Bell, General Motors, Texas Instruments and a long list of banks, insurers and hospital systems among the region's employers, and the Federal Reserve Bank of Dallas and the new Texas Stock Exchange anchor finance. Dallas's Consumer Health Division issues food establishment permits. Federal and Texas law, regulators and accreditation are covered on the United States page. Sterling serves North Texas from Sterling's New York office, with 20+ years of experience, 8,100+ client engagements in 60+ countries, and Effivity and Sterling Academy included with the engagement.

Dallas-Fort Worth is a two-city metroplex, Texas's largest manufacturing metro and a headquarters and inland-port region. The Dallas Regional Chamber describes a broadly diversified economy spanning logistics, aerospace, finance, health care and technology, while the Texas Comptroller identifies AllianceTexas and DFW Airport as major ports of entry.

Standards Sterling delivers in Dallas-Fort Worth

Each page sets out why the standard is asked for in Dallas-Fort Worth, what it requires and how Sterling delivers it locally. National law and accreditation are covered on the United States page.

Industries in Dallas-Fort Worth that ask for certification

• Inland ports, air cargo and logistics: AllianceTexas, an inland port built around Perot Field Fort Worth Alliance Airport with a BNSF intermodal facility, Amazon Air and FedEx regional hubs and a foreign-trade zone covering the port; DFW Airport, the state's largest airport-and-intermodal trade gateway by value. Standards asked for: ISO 9001, ISO 22301, ISO 45001, ISO/IEC 27001, ISO 14001
• Aerospace, defence and aircraft manufacturing: The Dallas Regional Chamber lists Lockheed Martin Aeronautics in Fort Worth, Bell, Airbus Helicopters, Bombardier, L3Harris, Raytheon and Triumph Aerostructures among major manufacturing operations; aircraft and spacecraft equipment is among DFW Airport's top export commodities. Standards asked for: AS9100, ISO 9001, ISO/IEC 17025, ISO 45001, ISO 14001
• Finance, insurance and corporate headquarters: The Federal Reserve Bank of Dallas, the newly formed Texas Stock Exchange with a Dallas headquarters, Nasdaq's Irving office and NYSE Texas, alongside banks and insurers such as JPMorgan Chase, Charles Schwab and State Farm, in a region the chamber credits with 21 Fortune 500 headquarters. Standards asked for: SOC 1, SOC 2, PCI DSS, ISO/IEC 27001, ISO 37301
• Health care and medical technology: Major hospital systems and academic medicine named by the chamber, including UT Southwestern Medical Center, Baylor University Medical Center, Parkland Memorial Hospital, Texas Health Resources and Children's Medical Center, plus medical-technology manufacturers such as Alcon, Smith & Nephew and Abbott. Standards asked for: HIPAA, ISO 13485, ISO/IEC 27001, ISO/IEC 27701, ISO/IEC 17025
• Technology, semiconductors, telecom and data centres: The chamber describes the fourth-largest concentration of high-tech jobs among US metros, from Texas Instruments and other semiconductor makers to AT&T, Ericsson and Cisco, with a deep set of data-centre operators. Standards asked for: ISO/IEC 27001, SOC 2, ISO/IEC 20000-1, ISO/IEC 42001, ISO/IEC 27701
• Automotive, food and consumer-goods manufacturing: The chamber names the General Motors Assembly plant in Arlington, Peterbilt Motors and Wabtec alongside food and beverage producers such as Frito-Lay, Kraft Heinz, Ruiz Foods and Coca-Cola Southwest Beverages, and says DFW has more manufacturing activity than any other Texas metro. Standards asked for: IATF 16949, ISO 9001, FSSC 22000, HACCP, ISO 22000

Industrial areas and zones in Dallas-Fort Worth

• AllianceTexas Global Logistics Hub (master-planned logistics and industrial development by Hillwood around Perot Field Fort Worth Alliance Airport, covered by Foreign-Trade Zone No. 196): logistics, aerospace, e-commerce, manufacturing, data centres
• DFW Airport Foreign-Trade Zone No. 39 (foreign-trade zone granted to DFW Airport): air cargo, importers and exporters, distribution
• Southern Dallas County inland port (inland port area anchored by the Union Pacific Dallas Intermodal Terminal across five cities): rail-served distribution, warehousing, manufacturing

Local authorities

• City of Dallas Consumer Health Division (Code Compliance): Issues food establishment permits, required for restaurants, bars, grocery stores, schools and other retail food establishments in Dallas.

National laws, regulators and accreditation are on the United States page.

Ports and logistics

• Airport: Dallas Fort Worth International Airport, with Dallas Love Field and Perot Field Fort Worth Alliance Airport

Rail, air and highway freight converge at AllianceTexas, DFW Airport and the southern Dallas County inland port, so exporters and distributors face customer questions on quality, safety and continuity.

Sterling in Dallas-Fort Worth

Served from Sterling's New York office. One team carries the work from scoping to certificate, with Effivity ISO & GRC software and preferential Sterling Academy access, with complimentary awareness training for your people. Sterling does not certify; certification decisions stay with independent bodies.

Nearby cities

• New York
• Los Angeles
• Chicago
• San Francisco Bay Area
• Houston
• Washington DC

What the standards require, clause by clause

Before you start in Dallas-Fort Worth, read what each clause and subclause requires of you, how to implement it, the evidence auditors look for and the mistakes to avoid.

Questions Dallas-Fort Worth clients ask